Vision changelog
Vision — the phone for your WebRTC video conferences. To get the most out of your Vision phone, make sure it is updated to the latest version!
How to update:
- To update its version, Vision must be connected to the Internet. If there is a new version available, the phone will automatically update during the night.
- Update manually from Stable: Phone App > Settings > Advanced > click “Search for updates”
- Update manually from Preview: Phone App > Settings > Advanced > enter the word preview into the field “Update source” and click “Search for updates”; in case there is a new FW available, repeat the last step once again
Vision App Version 3.07.80 Date: 20.11.2024
What’s new:
- Performance and stability improvements
- Improved the logic, so that there are audio notifications when receiving the second incoming call, with intervals of 15 seconds, instead of a single beep
Vision App Version 3.07.78 Date: 10.10.2024
What’s new:
- Added support of ACL “cannot set Status (DND/Away) » on Vision
- Improved Vision phone app to preserve mic gain settings after users re-login
- Fixed an issue of Vision crashing in some rare cases
Vision App Version 3.07.72 Date: 23.08.2024
What’s new:
- Fixed an issue of incorrect display of Away status of a monitored user on the BLF page (black circle instead of a yellow one) after upgrade to the latest app version
Vision App 3.07.70 Firmware v. 48.145.2.125 Date: 19.08.2024
What’s new:
- Added possibility to use Shared Voicemail BLF key on Vision phones
For setup instructions, check the documentation: https://wildix.atlassian.net/wiki/x/lQbOAQ - Improved the logic so that it is not possible to lower the volume of the Vision handset/speaker to zero
- Improved chat performance to avoid an occasional issue when chat unexpectedly crashed if a message contained an attachment
- Disabled chat and post-it functionality if it is globally disabled on the PBX with custom config parameter COLLABORATION_CHAT_ALLOW=false
- Fixed an issue in which g729 codec was prioritized over g711 codec on Vision phone
- Fixed an issue in which g729 codec was prioritised over g711u after call pickup on Vision phone
- Fixed an issue in which Vision users couldn’t see videos of other participants in Wizyconf videoconference
- Fixed an issue in which it wasn’t possible to access app menu because the system keyboard hid the app interface, which occurred when Poly Savi 7320 headset was connected
- Fixed an issue in which volume on some headsets (Poly Savi 7300, Plantronics Voyager Focus and Plantronics Blackwire 5220) increased to the maximum level by itself after changing the headset volume
- Fixed an issue in which app crashed in case of a large number of voicemails
Note: As long as the app on the affected devices continued crashing in a loop, the device should be factory reset before updating to the version with the fix.
Vision Firmware Rollback Date: 18.01.2023
What’s new:
- Rolled back the latest beta firmware v. 48.145.2.122 to v. 48.145.2.118 due to found issue with random reboot if USB headset is connected
- to get v. 48.145.2.118, go to Phone App -> Settings -> Advanced -> enter the word beta into the field “Update source” and click “Search for updates
Vision App Beta Version 3.07.54 Date: 26.10.2022
What’s new:
- Some UX improvements
Vision App Version 3.07.51 Date: 22.06.2022
What’s new:
- Added support of video calls from doorphones using JPEG streaming with digest authentication
- Added SSL support for video calls from doorphones using JPEG streaming
- Added full status LEDs support of MonoLED/ DuoLED and MonoLED-BT/ DuoLED-BT headsets
- current limitation: To change volume on MonoLED-BT/ DuoLED-BT, use volume buttons on Vision
- Improved quality of video calls between SuperVision and Vision applications
- Improved how statutes of users who use WP phones are visualized on other users’ Vision phones
- if a user is online (WP phone is registered and available, their status is now visualized with a blue icon (it used to be grey)
- Decreased audio delay during active calls
- Fixed an issue with missing mic gain setting
- Fixed an issue with a call being interrupted after answering it with a connected DuoLED-BT Headset
- Fixed an issue of distorted audio during outbound calls from Vision which sometimes occurred if Voiceflex SIP trunk provider was used, in such cases as high network latency or after pausing and resuming the call
Vision App Version 3.07.04 Date: 02.09.2020
What’s new:
- Fixed an issue when after switching to USB headset and hanging up, a call ended
- Minor file sharing improvements
Vision firmware BETA Version 48.145.2.119 Date: 11.08.2020
What’s new:
- Updated Wildix Phone application
Vision App Version 3.06.11 and firmware v. 48.145.2.118 Date: 24.06.2020
What’s new:
- Added support for Jabra, Plantronics (Poly), Sennheiser popular USB headsets models
- Added support for Bluetooth headsets connected via USB dongles: Jabra Link 360/ 370, Poly BT600 (for only Poly headsets), Sennheiser BTD 800
- Added compatibility with Let’s Encrypt ISRG Root certificate (becomes available after upgrade to firmware v. 48.145.2.118)
- Fixed a rare issue when automatic upgrade started during working hours
Vision App Version 3.05.06 Date: 24.02.2020
What’s new:
- Fixed an issue with an incoming call from a doorphone being answered automatically when streaming jpeg preview before answer configured for W-AIR Handsets
- Important Post-it notes are now displayed as a modal window:
- An important Post-it (can be sent only from Collaboration) is displayed above all the menus and blocks access to the app
- A user can only answer and hang up a call
- To unblock, user needs to respond by tapping OK
Vision App Version 3.04.01 Date: 20.01.2020
What’s new:
- Improved compatibility with WMS version numbering scheme
Vision App Version 3.03.03 Date: 08.01.2020
What’s new:
- Decreased audio delay during active calls
Vision App Version 3.03.02 Date: 31.10.2019
What’s new:
- Enabled Opus audio codec (super HD codec)
Vision App Version 3.02.01 Date: 30.10.2019
What’s new:
- Improved quality of video calls between SuperVision, Vision applications and Android mobile applications (starting from 4.08.06)
Vision App Version 3.01.26 Date: 11.10.2019
What’s new:
- New application design
- Added ‘Post-it’ visualization:
- Added notification for ‘Post-It’ messages (visual+sound)
- Added LED blinking indication for incoming ‘Post-It’ messages
- Incoming ‘Post-it’ messages are displayed in chat with yellow color
- Notification sound can be changed in phone settings (Settings -> Sound & notification -> Default notification ringtone)
- Added Online status for colleagues on History and Feature Keys pages
- Added icons for call recordings and faxes on History page
- Improved UX for conference callv
Vision App version 2.15.30 Date: 01.10.2019
What’s new:
- Fixed an issue when video from 2N IP doorphone being displayed with a delay
- Improved logic of processing the Recents list in chat, which addresses an issue with Recents list being lost in some cases
- Added ability to join a videoconference inside the App
Vision App version 2.15.26 Date: 24.09.2019
What’s new:
- Improved echo cancelation performance
- Improved call quality
Vision App version 2.15.18 Date: 27.08.2019
What’s new:
- Fixed an issue with impossibility to make semi-attendant transfer via feature key if the first call was not put on hold
- Optimized adaptive jitter buffer algorithm to improve call quality
- Added an option to disable sound notification from third party apps during a call (enabled by default, option located in Advanced settings)
- Added error message in case user tries to login using single sign-on without PBX domain
- Added support for calls and call control (mute/ answer call/ hangup call/ change volume) via USB headset
- ONLY WILDIX headsets are supported in this release
Firmware version 48.145.2.110
- Fixed a rare issue in which hardware buttons could stop working until phone reboot
- Updated Wildix Phone application
- Added additional debug info in phone log
- Added support for calls and call control (mute/ answer call/ hangup call/ change volume) via USB headset
- ONLY WILDIX headsets are supported in this release
Vision App version 2.14.08 Date: 22.07.2019
What’s new:
- Fixed an issue with impossibility to resume a call that was on hold for more than 5 minutes
- Added Finnish and Spanish translations
Vision App version 2.12.19 Date: 13.05.2019
What’s new:
- The volume of the microphone in handsfree mode has been tuned
Vision App version 2.12.15 Date: 02.05.2019
What’s new:
- Fixed an issue in which user could not answer selected call via headset when two ringing calls were present
- Fixed an issue with application always switching to call dialog (Dialpad) after receiving a call
- Added device name and application version in user-agent for API requests (example: “Android Collaboration Vision 2.12.12”)
- Password is no longer removed from login form in case application received Unauthorized from PBX to API request
- Decreased load on webserver of PBX during first login and lost connection to Presence server
- Moved option “Integration URL” from Developer to Advanced settings
- Added “Default tab” option in Advanced settings
- this setting allows configuring to which page application will be moved after an idle timeout
- default page is “Function keys”, default timeout 120 seconds
- possible options: Off, Dialpad, Function keys, Integration URL
- Added ability to start chat from live search results
- Stability improvements
- Added option “Debug” which enables additional debug info in phone log (Phone App > Settings > Advanced)
Firmware version 48.145.2.104
What’s new:
- Updated Wildix Phone application
- Added additional debug info in phone log
Hotfix version 2.10.17 Date: 12.04.2019
- Fixed an issue with echo cancellation in handsfree mode
Vision App version 2.10.13 Date: 05.03.2019
What’s new:
- Improved compatibility with WMS 4.01
Vision App version 2.10.11 Date: 21.02.2019
What’s new:
- Fixed an issue in which it was impossible to send an image from Vision in case more than 8 images were present
- Added option “Preferred video size” with options (QVGA, VGA – default, 720p)
- Fixed visualization of “DTMF” BLF on Vision
- Added open source regulation notice on About page
- Fixed an issue in which it was impossible to create audio conference from the application
- Stability improvements
Vision app version 2.9.98 Date: 14.01.2019
What’s new:
- Fixed an issue when application in some cases stopped updating status of Trunk, Timetable, Switch and Call Group Feature Keys
- Added support for adaptive jitter buffer (the max jitter buffer is 500ms) to improve call quality
- Improved the app audio engine to ensure better audio quality
- Fixed an issue in which a white vertical line was was displayed during a video call
- Fixed an issue in which a call, received with SRTP stream, was dropped
Firmware version 48.145.2.49
What’s new:
- Updated Wildix Phone application
- Improvements of security patches
Vision app version 2.9.85 Date: 30.10.2018
What’s new:
- Fixed an issue with wideband codec list not being activated
- Fixed an issue in which requests from the application in some cases created too many sessions files overflowing sessions storage on the PBX
Vision app version 2.9.78 Date: 16.10.2018
What’s new:
- Fixed an issue with auto-scrolling between BLF pages
- Wildix ringtone is now set by default on Vision
FW 48.145.1.130:
- Fixed an issue when a phone stopped receiving IP address via DHCP in some rare cases
Vision app version 2.9.76 Date: 03.10.2018
What’s new:
- Fixed a regression that appeared in v. 2.9.75, in which Vision phone was incorrectly displayed in WMS -> Users
Vision app version 2.9.75 Date: 01.10.2018
What’s new:
- Added configurable timeout in Settings->Developer for “Integration URL” feature
- Fixed an issue in which user could not hang up a call via handset on Vision if wired headset was connected
- Fixed an issue with one-way audio after a blind transfer done via Vision Feature Key Colleague if initial call had Direct RTP
- Fixed an issue with screen keyboard not being hidden for a call generated from live search drop-down menu
- Fixed an issue when user could not press Login button for the second time in case during the first try there was a network issue
- Fixed an issue with Colleague BLF not being changed in case user name changed (after this fix, to apply the change it’s sufficient to re-save BLF or reload the app)
Vision app version 2.9.59 Date: 31.07.2018
App version 2.9.59:
- Fixed an issue in which Vision could not connect to Presence server when all ports except for custom secure port were blocked
Firmware version 48.145.1.123:
- Added proxy settings
Vision app 2.9.33 Date: 06.06.2018
What’s new:
- Fixed an issue i which random digits were deleted from number in international format for numbers longer than 12 digits
- Decreased load on webserver of PBX during reconnection
FW 48.145.1.118
- “Application” button on phone keyboard can now be used to open the Phone app
“Application” button is situated right under the “Home” button - Added a button allowing to close the audio player (used to playback voicemails / recordings)
- Fixed an issue with Bluetooth page being displayed each time after waking up from idle (in case Daydream option was disabled in
Vision App 2.9.27 Date: 30.05.2018
What’s new:
- Increased max volume for handsfree (speaker)
- Added possibility to upgrade app without login (from Android dashboard menu)
- Decreased load on webserver of PBX during reconnection
- Stability improvements
- Moved repository from https://www.wildix.com/ to https://firmwares.www.wildix.com/
Vision App v. 2.9.23 Date: 15.05.2018
What’s new:
- Improved application stability
- Fixed an issue with echo on remote side in case volume level is set to maximum
- Fixed an issue with impossibility to playback Voicemail messages in some rare cases
- Removed the notification “Alpha version for demo only”
FW v. 48.145.1.115
- Fixed an issue with audio being played also to the handset, when using Bluetooth headset
- Fixed an issue with audio being played also to the handset, when using wired headset
- Fixed an issue with a loud click via the speakerphone before playing each sound.
Current limitations:
- USB Audio support and call control via USB device – not available yet, coming soon
- Video Conference inside the App – not available yet, coming soon
- Impossible to login to PBX via Google sign-on from the first attempt (it’s necessary to make a second try)
- Codecs h.263 and h.263+ are no longer available
Vision Alpha App v. 2.9.09 Date: 13.04.2018
What’s new:
- Improved application stability
- Fixed user-agent (Wildix Vision)
- Added support for call generation with tel:, sip:, wildix:, callto: URI schemes
Current limitations:
- USB Audio support and call control via USB device – not available yet, coming soon
- Video Conference inside the App – not available yet, coming soon
- When Bluetooth headset is used, audio is being played also to the handset
- When wired headset is used, audio is being played also to the handset
- Echo on remote side when max volume level is used
- Impossible to login to PBX via Google sign-on from the first attempt (it’s necessary to make a second try)
- Codecs h.263 and h.263+ are no longer available
Vision Alpha App v. 2.9.08 and FW v. 48.145.1.113 Date: 03.04.2018
How to update for the first time:
- Make sure Vision is connected to the Internet
- Log in to the Wildix Phone app
- Go to Phone App > Settings > Advanced > click “Search for updates”
- A new version of the Phone App is found, perform the update
- Go again to Phone App > Settings > Advanced > click “Search for updates”
- A new version of Android FW is found, perform the update
Otherwise, Vision will be updated automatically during the night, however we recommend to update the phone manually, start testing it in your office environment and provide us your feedback!
Current limitations:
- USB Audio support and call control via USB device – not available yet, coming soon
- Video Conference inside the App – not available yet, coming soon
- When Bluetooth headset is used, audio is being played also to the handset
- When wired headset is used, audio is being played also to the handset
- Echo on remote side when max volume level is used
- Impossible to login to PBX via Google sign-on from the first attempt (it’s necessary to make a second try)
- Codecs h.263 and h.263+ are no longer available
